Solid fuel boiler Titan

product ID: 1301001

  • Efficiency 80%
  • non-volatile
  • automation
  • storage buffer tanks
  • all types of solid fuel
  • water jacket
  • fuel loading 1-2 times a day
  • draft regulator (option)

No avaliable

Out of stock

SKU: 1301001 Category:

Description

Solid fuel boiler TITAN is used for heating water in heating systems of individual residential houses and industrial or administrative buildings. The solid fuel boiler Titan is made of 3 mm steel throughout the boiler structure, it works on various types of solid fuel. Types of solid fuels: firewood, pellets, sawdust, bark, coal, brown coal, anthracite, coke, peat, straw, wood chips.

The solid fuel Titanium boiler has a so-called “water jacket” throughout the furnace structure, which provides cooling of the steel and protects it from burning through, and also provides a high efficiency of 80%. For the convenience of fuel supply, the loading door has an inclination, the chimney outlet is round, has a cross section of 150 mm. The boiler is equipped with cast-iron grates and a temperature sensor that displays the temperature of the coolant. At the request of the consumer, the boiler can be equipped with a draft regulator.

Pressure in the heating system up to 3 bar, open firebox. The Titan boiler is made on the basis of the Titan gas boiler with a steel heat exchanger that does not burn through due to the “water jacket” around the entire contour of the heat exchanger.

The boiler can be installed both in new heating systems and in existing ones for duplication of a gas or electric boiler. When buying, it is necessary to choose the heat output that corresponds to the heating area and the heat load of the heating system. The boiler is operated at ambient temperature from +10 to +35 °C, relative air humidity not more than 80% and atmospheric pressure from 85 to 105 kPa.

Especially effective is the use of solid fuel boilers in systems equipped with storage buffer tanks. They allow the boiler to operate with a constant rated power, at which the efficiency of a solid fuel boiler is maximum. At the same time, excess heat is accumulated in the tank and consumed as needed. This allows you to significantly save fuel (up to 30%), and also prevents the possibility of overheating and attenuation of the boiler. Due to the sufficient volume of the boiler loading chamber, fuel is loaded 1-2 times a day (depending on the calorific value of the fuel). Boiler automation does not require electricity supply. The use of a circulation pump in the heating system makes it possible to equalize the heat transfer through the space heaters and increase the overall heating efficiency. In the event of an emergency power outage, a gravity bypass of the circulation pump is used.

The boiler cannot be used as a flow and flow-accumulative water heater.

The warranty period for the solid fuel boiler Titan is 24 months from the date of sale according to the stamp of the trade organization. The manufacturer reserves the right to make structural changes to the device that in no way impair its performance.

Characteristics

Rated power, kW 12 16
Operating power, kW 5-12 7-16
Heating area, m2 120 160
Fuel type Coal/Firewood
Fuel calorific value, kJ/kg 28000/12400
Efficiency, % 75-80
Maximum pressure in the system, MPa 0,3
The volume of water in the boiler, l 22 25
Maximum leaving water temperature, оС 90
Firebox type open
Number of heat exchangers 1
Exhaust gas removal method chimney
Minimum operating pressure of the heating system, bar 1
Maximum operating pressure of the heating system, bar 3
Chimney shape round
Chimney length, mm 150
Chimney width, mm 150
Connection thread G2”
Minimum allowable pipe height, cm 7
Boiler overall dimensions, mm 520 520
Width
Depth 560 600
Height 790 900
Weight, kg 78 85

Overall dimensions

Boiler capacity, kW А, mm В, mm С, mm
12 520 560 790
16 520 600 900

Reviews

There are no reviews yet.

Be the first to review “Solid fuel boiler Titan”